Product ID:EP5061, INSL-TILE HIGH GLOSS EPOXY BEIGE
MSDS Date:09/30/1988
FSC:8030
NIIN:00N030878
MSDS Number: BNQSY

INSL-X PRODUCTS CORP

115 WOODWORTH AVE
YONKERS, NY 10701
US

Emergency Phone: 914-969-8000

Info Phone: 914-969-8000

Cage: 75038

INSL-X PRODUCTS CORP

694 YONKERS, NY 10702 US

Cage: 75038

2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL. % (WT)

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: SEE ING

12.83-15.46.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: SEE ING

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

1.3%. %(WT)

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: SEE ING

6.36-42.13.

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: SEE ING

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

NOT

RTECS: 9999999ZZ

PER MIN. HOOD FACE VELOCITY.

RTECS: 9999999ZZ

OF CLEAN WATER TO FLUSH EYES AND SKIN.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPOR MAY IRRITATE EYES, SKIN AND
RESPIRATORY TRACT. EXPOSURE/INGESTION MAY CAUSE HEADACHE, DIZZINESS
AND NAUSEA. CONTACT MAY CAUSE SKIN IRRITATION OR ALLERGIC SKIN
REACTION. MAY BE HARMFUL IF ABSORBE D THROUGH SKIN. OVEREXPOSURE
MAY DAMAGERED BLOOD CELLS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: MOVE TO FRESH AIR. EYE: FLUSH EYES WITH WATER FOR
AT LEAST 15 MINUTES (LIFT LIDS). SKIN: WASH AFFECTED AREAS WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. IN CASE OF CONTACT,
CONSULT PHYSICIAN IMMEDIATELY. INGESTION: DO NOT INDUCE VOMITING,
AND CALL PHYSICIAN. IF BREATHING STOPS, APPLY ARTIFICIAL
RESPIRATION.

Flash Point Method:SCC
Flash Point:80.0F,26.7C
Lower Limits:0.8%
Upper Limits:15.8%
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA/FULL PROT
EQUIP.USE H2O FOG TO COOL CNTNRS.USE H2O SPRAY TO DILUTE SPILLS.
FIGHT FIRE FROM SAFE DIST.SHUT OFF ALL (SUPP DATA
Unusual Fire/Explosion Hazard:VAPOR MAY TRAVEL AND IGNITE OR FLASHBACK.

Spill Release Procedures:ABSORB W/SAND & DISP OF IN APPRVD MANNER. DIKE
AREA W/SAND TO CONTAIN SPILLED LIQ. RECOVER FREE PROD. WEAR PROT
CLTHG DURING CLEANUP. VENT CONFINED SPACES. OPEN WINDOWS & DOORS.
USE H2O SPRAY TO DILUT E SPILL. SHUT OFF & ELIM ALL IGNIT (SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:OVERHEATING MAY CAUSE CONTAINER TO
RUPTURE. USE EXPLOSION-PROOF ELECTRICAL EQUIPMENT. ISOLATE PRODUCT
FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:EMPTY CNTNRS RETAIN RESIDUE,& CAN BE DANGEROUS. DO
NOT CUT/WELD/BRAZE/SOLDER SUCH CNTNRS. GROUND CNTNRS WHEN
TRANSFERRING FROM ONE TO ANOTHER. STORE IN COOL,WELL VENT AREA.
VENT ADEQ TO MAINTAIN VAP C ONC BELOW TLV. CHECK ALL CNTNRS
(SUPDAT)

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IS RECOMMENDED IN
AREAS OF POOR VENTILATION. MAINTAIN GOOD VENTILATION.
Ventilation:PROVIDE ADEQ CROSS AIR CIRCULATION. EXHST AT POINT OF USE.
COMPLETE AIR CHANGE IN WORK AREA EVERY 3 MIN.LOC EXHST:(ING 5
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH STATION (FOUNTAIN). EMER (SAFETY)
SHOWER.USE CHEM RESISTANT APRON/OTHER IMPERVIOUS CLTHG. PROVIDE
SOURCE (ING 7)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:49.35-63.24. FIRE FIGHT PROC:POWER TO AREA.SPILL PROC: SOURCES.
SCOOP/VACUUM INTO CNTNR FOR DISP.OTHER PREC: FOR LEAKS. WEAR PROT
CLTHG AS IN SPILL/LEAK PROC.AVOID RPTD/PRLNGD BRTHG/ CONT W/SK
IN.KEEP CNTNRS CLSD WHEN NOT IN USE.DO NOT HNDL/STORE NEAR HEAT/
SPARKS/FLAME. MIN BRTHG VAP/MIST. DO NOT TAKE INTERNALL

HCC:F5
Boiling Pt:B.P. Text:>230F,>110C
Vapor Pres:SEE ING 2
Spec Gravity:0.920-1.283
Evaporation Rate & Reference:SLOWER(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES AND SMOKE. OXIDES OF CO AND/OR
CO2, NOX, ALDEHYDES.

Waste Disposal Methods:LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. KEEP PRODUCT OUT OF SEWERS AND WATERWAYS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.